Flush mounted dual USB charger with cover
Can be used to charge GPS, cell phone, MP3 or interphone.
Can be used on Cars, motorcycles, ATVs, scooters, or snowmobiles.
Dual USB port and maximum 2.1A current output.
With High-Tec IC, decrease charging current when the battery is nearly full
With reverse polarity protection
With overload protection
Replaceable 5A fuse tube.
With 60cm power cable.
The power lines are with 6.3mm connectors, you can change the power lines yourself.
Input Voltage: DC12V
Output Voltage: DC5V
Output Current: 2.1A and 1A
Indicator Light Color: Blue
Power Cable Length: about 60cm
Red line is positive electrode, and black line is negative electrode. Or you can see the marks + and – on the socket. Please double check when install.
Dual USB charger *1
Fused Cable* 1
If the connector plug is not suitable, you can remove the plug and connect to the circuit directly.
To install it, you need to drill a hole which diameter is about 28.8mm.
Connect the red line to the ACC terminal on car or ignition lock “ON” terminal on motorcycle. Connect the black line to the ground terminal.
Do not connect it directly to the battery on car or motorcycle. If you want to, use a switch to control the charger.
Cover it using the cover when you don’t use it to charge or it’s raining.