2 in 1, dual USB port charger and blueled voltmeter
Handlebar mount, can be used on 7/8” and 1” handlebar, maximum diameter is 30mm
With on/off switch
Total 3.1A current output. Upper port is 2.1A, under port is 1A
With waterproof cover
Can be used to charge GPS, cell phone, MP3 or interphone.
With High-Tech IC, decrease charging current when the battery is nearly full
With reverse polarity protection
With overload protection
Wide operating voltage range, up to DC 32V
High refresh frequency
Low power consumption
Soft blue light
Replaceable 5A fuse tube.
With 60cm power cable.
Can be used on motorcycles, ATVs, Quad bike or snowmobiles.
Input Voltage: DC12V
Output Voltage: DC5V
Output Current: 2.1A and 1A
Voltmeter Operating Voltage: DC 8~32V
Voltmeter Operating Current: under 10mA
Voltmeter Refresh Frequency: 10 times per second
Led Color: blue
Power Cable Length: about 60cm
2 in1 Dual USB charger & Voltmeter *1
The power lines are with 6.3mm connectors, you can change the power lines yourself.
If the 2.8mm connector plug is not suitable, you can remove the plug and connect to the circuit directly.
Connect the red line to the ACC terminal on car or ignition lock “ON” terminal on motorcycle. Connect the black line to the ground terminal.
Or connect it directly to the battery on your motorcycle. Remember turn on it if you don’t want to use it.